Products

  A rich golden coloured oil ideal for protecting and enhancing machine and hand made terracotta. Fills and hardens within the open pores of the terracotta inhibiting the absorption of grime and fluids. Offers good mechanical strength to low fire hand made terracotta. IMPORTANT: Do not let the oil oxidise on the surface of the tile. Remove any surplus, not absorbed into the tiles, within one hour of application using a clean cloth and, if necessary, a little Genuine Turpentine. Experiment on spare tiles to establish the number of coats required to achieve full saturation. Directions for use Apply by brush a coat at a time until the tiles are saturated. Allow at least 12 hours between each coat to ensure that the oil thoroughly oxidises. Most Terracotta will take one or two coats to reach saturation, while others, particularly some of the cruder hand made varieties, may take as many as four, five or even six coats. Leave the final coat to dry for at least 24 hours before polishing with any wax or other finished.  Coverage  5 litres covers approximately 5sqm (2-3 coats) Shelf Life – Up to 4 years for un-opened containers Health & Safety Keep out of the reach of children. Do not drink. Keep/Store away from clothing/combustible materials. Store in a closed container. Dispose of contents/container to hazardous waste collection point. May cause minor irritation on skin contact. May cause minor irritation on eye contact. Label in Accordance With (EC) No 1272/2008 DO NOT LEAVE SOILED APPLICATION CLOTHS WHERE THEY MAY CONSTITUTE A FIRE RISK, AS THEY ARE LIABLE TO SPONTANEOUS COMBUSTION. Important: All rags and cloths used should be immediately burnt, or if this is not possible soaked in soapy water before disposing of in a bin. The application cloths should never be crumpled up into a ball.

Read more less

Natural Eco-Friendly Clay Tiles Rustic Handmade Terracotta Suitable for Indoors & Outdoors  FORMAT DELIVERY ORDER SAMPLE ORDER SQM 7.5 x 30 x 2cm  £6.95 (Free postage) Sale £94.95m2 Including Vat Minimum order: 15m2 Lead time: 6-8 weeks Tiles per Square Meter: 44 Material: Terracotta (Natural Clay) Suitable for Underfloor Heating Finish: Presealed The product colour is based on grey and may have some brown colour variation which is created during the baking process. This exclusive range is delivered directly from Spain.

Read more less

  Natural Stone Marble Tiles Suitable for walls & floors FORMAT ORDER SAMPLE ORDER SQM   22 x 20 x 1cm Arabesque YouTube Video £1.00 (Free postage) Sale £495.00 Including Vat Tiles per square meter: 23 220x200x10mm Material: Marble Finish: Polished Waterjet Marble  Suitable for walls & floors Click here to see YouTube Video Delivery: 3-5 working days Natural Stone Polished Carrara White Marble Tiles with designer border, water jet luxury tiles. Sample size: small cut off 

Read more less

Lithofin TC Classic Wax Second step of the CLASSIC method: For final treatment of primed surfaces. Forms an easy to polish, wear-resistant wax layer, which helps the patina to develop. Can be used for future touch-up work. Ready to use Easy and safe to use Dries quickly Contains solvents Coverage: up to 10 m2/L Packaging: 1 L Stocking: closed, cool and dry, up to 3 years Technical Information Sheet Material Safety Data Sheet

Read more less

First step of the modern method: Pre-impregnation for increased protection against oil and grease. Applied immediately before final treatment with Lithofin Terracotta (TC) Sealant. Easy to apply, ready to use, solvent free, water based Lithofin Terracotta Impregnator penetrates into the porous surface and immediately forms a very thin visible film in the capillaries. This substantially prevents the penetration of water, soiling and grease. Lithofin Terracotta Impregnator only slightly reduces the diffusion of water vapour.  This method keeps the natural colour variation. It is slightly UV light resistant and does not yellow with time. The appearance of the surface is only very slightly changed, if at all. Field of application and suitable surfaces: For the prevention of staining for surfaces made of terracotta, clay slabs etc. especially in stain-sensitive situations such as kitchens and eating areas. It is always applied before the final treatment using Lithofin Terracotta Sealant. Please note: Surfaces which have been pre-treated at the production stage or have been waxed or have a saltglazed finish, cannot be treated. In case of doubt, make a small test in advance. Always treat the whole area of the room in question. While the treatment is being applied, the surface may appear somewhat spotty but this will disappear after drying. Wipe off splashes on wood, glass, PVC, varnished surfaces and permanently flexible joins with a cloth. Directions for use: Apply Lithofin Terracotta Impregnator generously and uniformly to the clean, stain free and dry surface using a mop or a sponge. It can also be applied using a garden-spray if followed up by the immediate use of a sponge to achieve uniform distribution. If the surface is very absorbent, a second application should be made about 30-40 minutes later. Avoid the formation of small puddles or drops by wiping over immediately. Any product residue seen drying out on the surface should be removed with a fluff free cloth. The suitable temperature range for application is 5-25°C. Clean any equipment used for the application with water. Immediately the applied material has dried out, the final treatment with Lithofin Terracotta Sealant should commence. Coverage: About 5-10m2/L, for soft clay slabs, handmade/ machine-made Spanish or French varieties of terracotta. About 10-15m2/L, for Florentine and Italian terracotta. Storage: Keep in a dry, frost-free storage area. Use any containers, which have been opened without delay.   Lithofin TC Impregnator Technical Data [Download] Lithofin TC Impregnator COSHH Sheet [Download]

Read more less

Second step of the Modern method: For treatment of surfaces which have been pre treated with Lithofin TC Impregnator. Also suitable for terracotta which has been pre treated by the manufacturer. Produces a naturally bright, neutral appearance. Self glossing, water based, easy to apply.  It is a water-based product, which is ready-for use and contains high-quality and natural waxes together with additives. Lithofin terracotta Sealant forms a protective film, which has a natural sheen. The effect of this is to prevent any staining on the surface and prevent penetration. Maintenance is greatly erased because at the same time the surface roughness is reduced. The appearance of the surface material is improved but it keeps its natural colour structure. The protective film is resistant to UV-light and does not turn yellow with age. It has good resistance to abrasion and can be used easily and safely. Field of Application and Suitable Surfaces: For the final treatment of internal surfaces consisting of terracotta, earthenware slabs etc., where a natural wax look finish is required. Also suitable for pre-treated tiles. Please Note: Salt-glazed surfaces cannot be treated with Lithofin terracotta Sealant. Pre-impregnation of untreated, absorbent cotto with Lithofin terracotta Impregnator improves the protective action and gives a lighter appearance to the surface. Do not walk on the surface while it is drying out. Always treat the whole of the room in question. Wipe off splashes on wood, glass and varnished surfaces with a damp cloth. Directions for Use: Apply Lithofin terracotta Sealant generously and uniformly to the clean, dry surface using a roller or sponge. It can also be applied using a garden-spray if followed up by the immediate use of a sponge to achieve uniform distribution. After a drying time of about 40-60 minutes, a second application must be made. Avoid the formation of small puddles. If the base material is very absorbent a third application may be necessary. If treating any pre-treated or waxed surfaces apply the product in a diluted form. The suitable temperature range for application is 5-25°C. Clean any equipment used for the application with water. Coverage: About 5-10m2/L, for soft earthenware slabs, Spanish or French varieties of terracotta (double application). about 10-15m2/L, for machine or hand-pressed varieties (double application). about 10-15m2/L, for pre-impregnated or pre-treated surfaces. After Treatment: For subsequent care treatment, we recommend Lithofin Easy Care. If the protective effect diminishes, Lithofin Terracotta Sealant can also be added to the wash water. Lithofin TC Sealant Technical Data [Download] Lithofin TC Sealant COSHH Sheet [Download

Read more less

  Natural Eco-Friendly 100% Clay Tiles Suitable for Indoors & Outdoor Our exclusive Mayfair Terracotta .This unique range has a pale white sandy finish. Each tile has been coated with limewash (chalk) & white grout. We recommend this range is sealed using the invisible sealing method - 2-3 coats of stone sealer. FORMAT DELIVERY ORDER SAMPLE ORDER PALLET 20 x 20 x 2cm 3-5 days* £6.95 (Free postage) £599.00 Including Vat Tiles per square meter: 25 Sold by pallet (20m2) Material: Terracotta (Baked Earth) Finish: Unsealed Suitable for Underfloor Heating

Read more less

  Natural Eco-Friendly 100% Clay Tiles Suitable for Indoors & Outdoor Our exclusive Mayfair Terracotta .This unique range has a pale white sandy finish. Each tile has been coated with limewash (chalk) & white grout. We recommend this range is sealed using the invisible sealing method - 2-3 coats of stone sealer. FORMAT DELIVERY ORDER SAMPLE ORDER PALLET 20 x 20 x 2cm 3-5 days* £6.95 (Free postage) £695.00Inc Vat Tiles per square meter: 25 Sold by pallet (25m2) Material: Terracotta (Baked Earth) Finish: Unsealed Suitable for Underfloor Heating

Read more less

A natural, matt finish impregnating sealer that will delicately enhance colour and texture. Helps protect against staining. Strongly repels water, oil and grease and allows surfaces to breathe. Suitable for artificial stone, brick, paving and limestone, marble, quarry, sandstone, slate, terracotta, terrazzo and travertine tiles. Suitable for interior and exterior applications. Suitable for Terracotta Tiles  Also for Polished & Unpolished Natural Stone, Grout / Paving / Concrete / Brick / Render Excellent Stain & Dirt Protection Fights Against Mould & Limescale Coverage 5ltr: Approximately 10m2 ( 2 -3 coats) Easy to Apply - Only 2 to 3 Coats Required Invisible Finish - Does Not Alter Tile/Grout Colour Highly Repellent Long Lasting Protection Interior / Exterior / Domestic / Commercial YouTube

Read more less